Specifications

Confidential
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
TM-L90
Specification
(STANDARD)
EPSON
GENERAL FEATURES
1) This specification applies to the following models of the TM-L90 series printer:
TM-L90 (with serial interface)
TM-L90P (with parallel interface)
* This specification describes only the outline of the general functions and the model-dependent
functions of the commands. For detailed specifications and usage of the commands, please refer to
the ESC/POS APG (Application Programming Guide) that is separately issued.
2) Features
The TM-L90 series printer has the following features:
<Printing>
• Label printing is possible. (Die-cut label paper)
Die-cut label paper: Label paper that has a predefined size of labels with an interval
between labels.
• Continuous label printing is possible.
Continuous label paper: Label roll paper without labels die-cut in predefined sizes and
label length is variable with an autocutter.
• Receipt printing is possible (thickness: 145 µm).
• High-speed printing is possible.
Normal printing: 120 mm/s {4.72"/s} maximum
High-speed printing: 150 mm/s {5.91"/s} maximum
• Using two-color thermal paper, two-color printing is possible (print speed: 90 mm/s {3.54"/s}
maximum).
<Printer handling>
• The printer can be placed vertically (standard) or horizontally on a table, and hung vertically
on a wall.
• Easy drop-in paper loading.
• Cable connectors are housed in the bottom of the printer.
<Software>
• Command protocol is based on the ESC/POS
®
Proprietary Command System.
• OPOS ADK and Windows
®
printer drivers are available.
• Printing of various bar codes is possible. Two-dimensional codes (PDF417, MaxiCode,
QRCode) are supported.
• Various layouts are possible by using page mode.
<General>
• Various interface boards (EPSON UB series, except UB-P02 and UB-U05) can be used.
• Using a paper roll spacer, various width papers can be used (38 mm to 70 mm {1.5 to
2.76"}) by adjustment of the paper roll spacer.
• Can use a paper roll with up to 90 mm {3.5"} diameter.
• Environment-friendly design reduces the power consumption in standby mode (compared to
the EPSON’s legacy models: approximately 1/2).
• Using with the EPSON PS-180 power supply (power-saving type), the power consumption
for the printer and the AC adapter can be reduced by a large amount.
II III