Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
111 110
TM-L90
Specification
(STANDARD)
E
GS $ n
L
n
H
[Name] Set absolute vertical print position in page mode
[Format] ASCII GS $ n
L
n
H
Hex 1D 24 n
L
n
H
Decimal 29 36 n
L
n
H
[Range] 0 ≤ (n
L
+ n
H
× 256) ≤ 65535 (0 ≤ n
L
≤ 255, 0 ≤ n
H
≤ 255)
[Description] • Sets the absolute vertical print starting position to [(n
L
+ n
H
× 256) × (vertical or horizontal
motion units)] in page mode.
GS ( A p
L
p
H
n m
[Name] Execute test print
[Format] ASCII GS ( A p
L
p
H
n m
Hex 1D 28 41 p
L
p
H
n m
Decimal 29 40 65 p
L
p
H
n m
[Range] (p
L
+ p
H
× 256) = 2 (p
L
= 2, p
H
= 0)
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
1 ≤ m ≤ 3, 49 ≤ m ≤ 51, m = 64
[Description] • Executes a test print with a specified test pattern on a specified paper type (roll paper).
•
n specifies the paper type as listed below to be tested:
n Target paper source
0, 48
1, 49
2, 50
Roll paper
•
m specifies a test pattern as listed below:
m Test pattern
1, 49 Hexadecimal dump
2, 50 Printer status print
3, 51 Rolling pattern print
64 Automatic paper layout setting mode function
• When automatic paper layout setting mode function (m = 64) is performed, the paper layout
specified with Function 49 of
GS ( E
is canceled.
[Notes] • The printer executes a hardware reset after the procedure to place the image into the
non-volatile memory. The printer clears the receive and print buffers, and resets all settings
(user-defined characters, macros, and the character style) to the mode that was in effect at
power on.