Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
124 123
TM-L90
Specification
(STANDARD)
E
• When a =2, memory switch 2 is set as follows:
Bit Setting value (b) Function
1 50 Reserved.
48 Autocutter is installed.
2
49 Autocutter is not installed.
3 – 8 50 Reserved.
• When a =8, memory switch 8 is set as follows:
Bit Setting value (b) Function
1 50 Reserved.
48
When a paper layout error occurs, the printer recovers by
DLE ENQ, DLE DC4 (fn = 8) or the cover open/close.
2
(*1)
49
When a paper layout error occurs, the printer recovers by
DLE ENQ, DLE DC4 (fn = 8).
48
The PAPER LED comes on when a paper near-end is
detected.
3
(*1)
49
The PAPER LED does not come on when a paper near-end
is detected.
48
Sets the maximum length of automatic paper measurement
to 160 mm.
4
49
Sets the maximum length of automatic paper measurement
to 300 mm.
48 Does not enable left or right margin of bar code print.
5
49 Enables left or right margin of bar code print.
48 Performs the print starting positioning operation at power on.
6
49
Does not perform the print starting positioning operation at
power on.
7 50 Reserved.
48
Printer cover open during operation:
Error that automatically recovers.
8
49
Printer cover open during operation:
Error that can possibly recover.
• This function code (fn = 3) is enabled only in the user setting mode.
*1: Supported only by the firmware version 1.05 or later (for Japanese, multilingual character
model) or 1.06 or later (for ANK model).