Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
141 140
TM-L90
Specification
(STANDARD)
E
<Function 49>
GS ( E p
L
p
H
fn sa; sb; sc; sd; se; sf; sg; sh; (fn = 49)
[Format] ASCII GS ( E
pL pH fn sa; sb; sc; sd; se; sf; sg; sh;
Hex 1D 28 45
pL pH fn sa; sb; sc; sd; se; sf; sg; sh;
Decimal 29 40 69
pL pH fn sa; sb; sc; sd; se; sf; sg; sh;
[Range] 9 ≤ (pL+pH
×
256) ≤ 36 (9 ≤ pL ≤ 36, pH = 0)
fn = 49
sa =“48”, “49”, “64”
“135” ≤ sb ≤ “3000”
“25” ≤ sc ≤ “100”
“0” ≤ sd < “3000”
“0” ≤ se < “3000”
“38” ≤ sf ≤ “3000”
“27” ≤ sg ≤ “507 (when sa = “48” or sa = “49” is specified)
“47” ≤ sg ≤ “507” (when sa = ”64” is specified)
“240” ≤ sh ≤ “720” (when sa = “48” or sa = “49” is specified)
“240” ≤ sh ≤ “700” (when sa = “64” is specified)
If any one of the following cases occurs, this command is ignored because the parameter is
improper:
When
sa
= “49” is specified
sb ≤ sd
sb ≤ se
sb < sf
paper width < sg + sh + 33 (when paper width is set to 78 mm or less)
paper width < sg + sh + 43 (when paper width is set to 79 mm)
paper width <
sg
+
sh
+ 53 (when paper width is set to 80 mm)
When sa = “64” is specified
sd < sc
se ≥ sc
sb
<
sd
+
sf
paper width <
sg
+
sh
+ 53
[Default] The status where no value settings are newly defined.
[Description] • Sets the paper layout.
•
Origin of the layout is selected by
sa
.
sa Origin of the layout Remarks (usable paper)
48 None
(does not use the layout).
Receipt, continuous label (without black mark)
49 Top of the black mark Receipt (with black mark)
Die-cut label (with black mark)
64 Bottom of the label Die-cut label (without black mark)