Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
142 141
TM-L90
Specification
(STANDARD)
E
•
The vertical layout is set by
s
b
∼
sf
.
(BM is the abbreviation for black mark).
When sa = “49” is specified When sa = “64” is specified
sb
The distance between the top of the
BM and the top of the next BM.
The distance between the bottom of
the label and the bottom of the next
label.
sc
The distance between the top and
bottom of the BM.
The distance between the bottom of
the label and the top of the next label.
sd
The distance between the top of the
BM and the print starting position.
(The print starting position = the top
of the print area.)
The distance between the bottom of
the label and the print starting position.
(The print starting position = the top of
the print area.)
se
The distance between the top of the
BM and the cutting position.
The distance between the bottom of
the label and the cutting position.
sf
The distance between the print
starting position and the bottom of the
print area.
The distance between the print starting
position and the bottom of the print
area.
sb
sc
sd se
sf
(when sa = “49” is specified)
sb
sc
sd
se
sf
(when sa = “64” is specified)
•
The horizontal layout is set by
sg
and
sh
.
When sa = “49” is specified When sa = “64” is specified
sg
The distance between the left edge of
the paper and the left edge of the
print area.
The distance between the left edge of
the paper and the left edge of the print
area.
sh The distance between the left edge
and the right edge of the print area.
The distance between the left edge
and the right edge of the print area.
(when
sa
= “49” is specified) (when
sa
= “64” is specified)
sh
sg
sh
sg