Specifications
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET
NEXT
143 142
TM-L90
Specification
(STANDARD)
E
• The vertical layout (sb ∼ sf) and horizontal layout (sg, sh) can be set in increments of 0.1 mm.
Example: The distance between the bottom of the label and the bottom of the next label
= sb × 0.1 mm
• This function (
fn
= 49) is enabled only in the user setting mode.
[Notes] • Make enough margin to set the cutting position.
• If the distance between the cutting position and the next print starting position is set to 3.6
mm {0.14"} or less, the printer will skip one label and feed to the top of the next label,
because the printer cannot perform feeding in reverse to set the paper to the print starting
position.
• When
sa
= “49” is specified, die-cut label printing (with black marks) is possible. However,
there is no way that the printer can differentiate the type of paper – label (with black marks) or
receipt (with black marks). Therefore, the user must consider carefully the print position and
the cutting position for the autocutter.
• The autocutting position se must be set between the labels.
• The print position –
sd
and
sf
(top and bottom margin) must be set over 2 mm {0.08"} from
the top and the bottom of the label, respectively.
• The print position –
sg
and
sh
(left and right margin) must be set over 2.8 mm {0.11"} from
the left and the right of the label, respectively.
sd
sf
e
sg
sh
2.8
or more
2.8
or more
2
or more
2
or more
• If the paper layout information is already written in the NV memory and the user wants to
change to a new type of paper, the user must have the current type of paper (not the new
type) loaded in the printer when this command is used to change to the settings for the new
paper.
• When two or more types of paper are used alternately, it is recommended to use the
automatic paper recognition function as described in Section 3.8, not setting the paper layout.
• The paper which has a 71 to 79 mm {2.80 to 3.11"} of the paper width cannot be used
because of the thickness of the paper roll spacer.