Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
8 7
TM-L90
Specification
(STANDARD)
E
1.6 Paper Specifications
1) Paper type: Specified thermal paper
The following four kinds of paper can be used:
•
Receipt paper, continuous label paper (without black mark)
•
Receipt paper (with black mark)
•
Die-cut label paper (without black mark)
•
Die-cut label paper (with black mark)
Refer to Function 49 of the
GS ( E
command for the paper layout details.
NOTES: • Die-cut label paper is a label paper that has a predefined size of labels with an
interval between labels.
• Continuous label paper is a label roll paper without labels die-cut in predefined
sizes and label length is variable with an autocutter.
• Continuous label paper can be used with the same settings as for receipt paper
(without black mark).
• When a die-cut label (with black mark) is printed, the user must consider the print
position and the autocutting position. If printing is executed on the backing paper
(liner) or the label on backing paper is cut by the autocutter, the thermal print head
may be damaged.
• Die-cut labels (with black marks) cannot be used in the automatic paper layout
setting mode.
2) Form: Paper roll
3) Paper width: 80 mm paper width model: 79.5 ± 0.5 mm {3.13 ± 0.02"}
60 mm paper width model: 59.5 ± 0.5 mm {2.34 ± 0.02"}
38 mm paper width model: 37.5 ± 0.5 mm {1.48 ± 0.02"}
4) Paper roll size: Roll diameter: Maximum 90 mm {3.54"}
Take-up paper roll width: 80, 60, 38, +0.5/-1.0 mm
{3.15", 2.36", 1.50", +0.02"/-0.04"}