Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
10 9
TM-L90
Specification
(STANDARD)
E
6) Specified original paper type No.:
The following original paper can be used for receipt:
(Paper marked with * is a specified roll paper.)
• Single-color thermal roll paper:
*TF60KS-E (paper thickness: 75 µm) Nippon Paper Industries Co., Ltd.
*TF11KS-ET (paper thickness: 145 µm) Nippon Paper Industries Co., Ltd.
TF50KS-E (paper thickness: 65 µm) Nippon Paper Industries Co., Ltd.
PD160R (paper thickness: 75 µm) Oji Paper Mfg. Co., Ltd.
P350 (paper thickness: 62 µm) Kanzaki Specialty Paper (USA)
F5041 (paper thickness: 60 µm) Mitsubishi HiTec Paper
Flensburg GmbH (Germany)
KF50 (paper thickness: 62 µm) KANZAN Spezialpapiere GmbH
(Germany)
• Two-color thermal roll paper:
*PD750R (paper thickness: 75 µm) Oji Paper Mfg. Co., Ltd.
7) Notes on using two-color thermal paper
• Two-color printing is performed using a two-color thermal paper, if the two-color print is
selected by the customized value setting with Function 5 of the
GS ( E
command.
• There may be some cases where the print color may not be clear depending on the print
pattern.
• Printing with Color 2 (red on the specified two-color thermal paper) may fade over time,
depending on the environmental circumstances. To keep the print for long-term storage, it is
recommended to print with Color 1 (black on the specified two-color thermal paper).
• The reliability when two-color thermal paper is used differs from the reliability when
single-color thermal paper is used. Refer to Section 1.12, Reliability, for details.
• Make sure to use the specified two-color thermal paper in two-color printing. Otherwise, the
thermal print head may be damaged.
8) Paper roll spool diameter
Inside: 25.4 mm {1.00"}
Outside: 31.4 mm {1.24"}
NOTE: Paper must not be pasted to the paper roll spool.
9) Print density adjustment
For best print quality and reliability, select the proper print density for the paper type used. See
the table below. Print density can be set with a software command.
Roll Paper No. Original Paper No. Density Level
P350 90 %
KF50 95 %
ENTPC series
ENTPD series
TF60KS-E, TF50KS-E, PD750R,
F5041
100 %
ENTPE series PD160R, TF11KS-ET 105 %
ENTLA series
ENTLB series
130 %