Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
17 16
TM-L90
Specification
(STANDARD)
E
1.12 Reliability
1) Life:
Printer mechanism (including the thermal head life)
When printing labels (face stock) with the ENTLA series (in single-color mode):
1,000,000 labels issued
(When the length of the label in the paper feeding direction is 25.4 mm
{1"} through 63.5 mm {2.5"}. The value above corresponds to
approximately 30 km to 70 km {18.64 to 43.5 miles} of running length.
When printing labels whose length exceeds 63.5 mm, the label-issuing
life is 70 km {43.5 miles} of running length.)
When issuing receipts (thickness type) with the ENTPE series (in single-color mode):
10,000,000 lines printed (3.75 mm {0.15"} for one line)
(When the value above is calculated, the printer uses 15-line feeding
and 10-line printing repeatedly with a 145 µm paper thickness. The
value above corresponds to approximately 60 km {37.28 miles} of
running length.)
When printing receipts with the ENTPD series (in single-color mode):
20,000,000 lines printed (3.75 mm {0.15"} for one line)
(When the value above is calculated, the printer uses 15-line feeding
and 10-line printing repeatedly with 75 µm of paper thickness. The
value above corresponds to approximately 120 km {74.57 miles} of
running length.)
When printing labels (face stock) with the ENTLB series (in two-color mode):
500,000 labels issued
(When the length of the label in the paper feed direction is 25.4 mm
{1"} through 63.5 mm {2.5"}. The value above corresponds to
approximately 15 km to 35 km {9.32 to 21.75 miles} of running length.)
When printing receipts with the ENTPC series (in two-color mode):
10,000,000 lines printed (3.75 mm {0.15"} for one line)
(When the value above is calculated, the printer uses 15-line feeding
and 10-line printing repeatedly. The value above corresponds to
approximately 60 km {37.28 miles} of running length.)
Thermal head: 150 million pulses
Autocutter:
When cutting receipts: 2,000,000 cuts (except for KF50, when the paper thickness is less than
75 µm)
1,200,000 cuts (for KF50 (KANZAN))
1,000,000 cuts (when the paper thickness is more than 75 µm and less
than 145 µm)
When cutting labels: 1,000,000 cuts (when the backing paper (liner) between labels is cut)
500,000 cuts (when the continuous label paper is cut. 1,000,000 cuts if
the cutter blade is cleaned)
NOTE: If a die-cut label is used, cut the backing paper (liner) between labels (face stock).
Otherwise, adhesive attaches the cutter blade, and it may cause cutting trouble.
End of life is defined as the point at which the component reaches the beginning of the
wearout period.