Specifications

Confidential
REVISION SHEET
Sheet 5 of 9
REV. SHEET CHANGED CONTENTS
7 1.6 Page Specifications
1) Paper type: NOTES (added)
8
5) Usable paper → Specified roll paper type No. (changed)
9 6) Specified original paper type No. (changed)
Roll paper No. (added)
Original Paper No. 140LAB, 130LAB-1 (deleted)
10) Paper to use for high speed
HD75, HG76B, 140LAD (deleted), ENTLA series (added)
10
11) Recommended label specifications → Requirement for label length
12) Recommended ticket specifications → Recommended for black mark
intervals
11 13) Recommended for black mark position (added)
12, 13 1.7 Printable Area
Printable area, right margin, positioning dot number (changed)
Figure 1.7.1 tolerance (deleted)
14 1.9 Internal Buffer
2) User-defined buffer: (changed)
5) NV user memory: 1KB through 129KB → 1KB through 192KB
15 1.10 Electrical Characteristics
2) Current consumption for two-color printing (added)
16 1.12 Reliability
Type No. of the specified roll paper (added)
Autocutter (changed)
31 2.1.3 Other Interfaces
UB-S03 (deleted)
33 2.2.3 Drawer Kick-out Connector
MOLEX 52065-6615 → DDK 285D-7660J-100
37 Kanji command list
Japanese Kanji → Japanese, Chinese Kanji → Simplified Chinese,
Taiwanese Kanji → Traditional Chinese, Korean Kanji → Korean
58
Table 3.3.2, Refer to Table 3.3.2 → Table 3.3.3
59
Table 3.3.7, Bit 2: Large → 4KB, Small → 45 bytes
65 3.5 Self-test
”Self-test printing, …” → “If you want to continue …”
(*2) • A partial cut after …
→ • Autocut after completing … & • Feed to the print starting …
… and goes into the standard … (deleted)
67 3.7 Memory Switch Setting Mode
Press the paper FEED button (located inside the printer) twice (added)
68 3.8 Automatic Paper Recognition Function (added)
3.9 Automatic Paper Layout Setting Mode (added)
C
69
3.9 Paper Detectors → Error Processing
TITLE
TM-L90
Specification
(STANDARD)