Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
E
62 61
TM-L90
Specification
(STANDARD)
2) Customized value
The customized value is set with the
GS ( E
command.
Function Value
1KB 64KB Selection of the NV user memory
capacity
128KB 192KB
None 64KB
128KB 192KB
256KB 320KB
Selection of the NV graphics
memory capacity
384KB --
Selection of the paper width 38 mm, 39 mm, ….. 79 mm, 80 mm
(43 settings in increments of 1 mm)
One-part energizing Two-part energizing Selection of the print control
Three-part energizing Four-part energizing
70 % 75 %
80 % 85 %
90 % 95 %
100 % 105 %
110 % 115 %
120 % 125 %
Selection of the print density
130 % 135 % 140 %
Selection of the paper Single-color Two colors
Selection of the print speed Print speed level 1 (max. 26 mm/s), print speed level 2,
print speed level 3, print speed level 4,
print speed level 5, print speed level 6 (max. 120 mm/s),
print speed level 7, print speed level 8,
print speed level 9 (max. 150 mm/s).
Light Medium Selection of black-color density in
two-color printing
Dark --
NOTES: • Since the NV graphics data area and the NV user memory use the same memory area,
each area has a limitation. Refer to
GS ( E
<Function 5> for details.
• The maximum print speed is available only in one-part energizing mode.
• Four-part energizing mode can reduce power consumption.
• The print width can be set for 43 paper types with a 1 mm pitch in the range from 38 to
80 mm {1.50 to 3.15"}. However, print width cannot be set in the range from 71 to 79
mm {2.80 to 3.11"}, because of the thickness of the paper roll spacer.