Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
TM-P60
Specification
(
STANDARD
)
90 89
E
GS ( M pL pH fn m
[Name] Customize printer control value(s)
[Description] • Customizes the printer control value(s).
• pL, pH specify (pL + pH × 256) as the number of bytes after pH (fn and m).
• fn specifies the function.
• m specifies the process of each function.
fn Format
Function
No.
Function name
1, 49 GS ( M pL pH fn m 1 Save the setting values from the work area into
the storage area.
2, 50 GS ( M pL pH fn m 2 Load the setting values stored in the storage area
to the work area.
3, 51 GS ( M pL pH fn m 3 Select the setting values loaded to the work area
after the initialization process.
• Applied setting values for this command
Setting value Command
Status GS a
Characters ESC SP, ESC –, ESC E, ESC M, ESC R, ESC t, ESC {,
GS !, GS B, GS b
Line spacing ESC 3
Print position ESC D, ESC T, ESC a, GS L, GS W
Bar code GS H, GS f, GS h, GS w
Other characteristics ESC c 5, GS ( D, GS ( K <Function 48>
[Notes] • Frequent write command executions by an NV memory write command may damage
the NV memory. Therefore, it is recommended to write to the NV memory less than
10 times a day.
• If the power is turned off or the printer is reset via an interface while this command is
being executed, the printer may go into an abnormal condition. Be careful not to turn
the power off or let the printer be reset via an interface while this command is being
executed.
• While processing this command, the printer is BUSY while writing the data to the NV
memory and stops receiving data. Therefore, be sure not to transmit data, including
the real-time commands, while the printer is BUSY.