Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
TM-P60
Specification
(STANDARD)
E
2 1
1. GENERAL SPECIFICATIONS
1.1 Countries and areas where the TM-P60 can be used
Each model of the TM-P60 can only be used in the countries and areas listed below.
Model Countries
001 Japan
011 USA, Canada
Austria, Belgium, Germany, Luxembourg, Netherlands, Switzerland, France, Italy,
Greece, Spain, Portugal, Denmark, Finland, Ireland, Sweden, UK
021
Only the products with serial numbers of GDYG003018 onward can be used in the
following 9 countries.
Czech Republic, Estonia, Hungary, Lithuania, Latvia, Poland, Slovenia, Slovak
Republic, Norway
031 Australia, New Zealand
051 Thailand, Malaysia
501 Japan
511 USA, Canada
521
Austria, Belgium, Germany, Luxembourg, Netherlands, Switzerland, France, Italy,
Greece, Spain, Portugal, Denmark, Finland, Ireland, Sweden, UK, Czech Republic,
Estonia, Hungary, Lithuania, Latvia, Poland, Slovenia, Slovak Republic, Norway
531 Australia, New Zealand
541 Hong Kong
551 Thailand, Malaysia
1.2 Print Specifications
1) Print method: Thermal line printing
2) Dot density: 8 dots/mm × 8 dots/mm (203 dpi × 203 dpi)
[dpi: dots per 25.4 mm {1"}]
3) Feed direction: Unidirectional forward with friction feed
4) Paper width: 58 mm {2.28"} (default setting) or 60 mm {2.36"}
60 mm {2.36"} paper width can be set by removing the roll paper
spacer installed in the printer.
5) Print width: 52.5 mm {2.07"}, 420 dot positions (when the paper width is 58 mm)
54 mm {2.13"}, 432 dot positions (when the paper width is 60 mm)
6) Number of characters per line:
Font A Font B Font C
58 mm {2.28"} 35 42 52
60 mm {2.36"} 36 43 54
7) Print speed: 70 mm/s {2.76"} maximum
(When total number of dots to be printed is 64 dots or less per line)
NOTES: 1. The print speed listed above is the value when the print density is set to 100% with the
battery fully charged at 25°C {77°F}. The print speed may change automatically
depending on the power supply voltage and the condition of the head temperature.
G