Specifications

Confidential
15
TITLE
TM-P60
Specification
(STANDARD)
SHEET
REVISION
E
NO.
SHEETNEXT
App.16 App.15
APPENDIX I: PRECAUTIONS FOR USE
1) When you have not used the printer more than one week, recharge before using it.
2) When you will not use the printer for a long term, remove the battery before you store the
printer.
3) You are recommended to use the printer at room temperature (10 to 30°C {50 to 86°F})
4) The indication of the remaining battery is a rough measure. You are recommended to
immediately replace the battery after the "level L" of the remaining amount has been
indicated.
5) If the "level L" is indicated soon after charging, immediately replace the battery with new
one because its life has expired. (Rough measure of the life: approximately 500 times of
charging and discharging)
6) Never use batteries other than specified one because using them is very dangerous.
7) Never use chargers other than specified one because using them is very dangerous.
8) Do not remove the battery during charging.
9) When the printer is used near a microwave, the wireless communication may be poor. In
this case, use the printer away from the microwave or change the channel to one that does
not interfere.
10) When a battery charging error is indicated, immediately remove the AC adapter and the
battery. Do not use the battery because it may be out of order.
11) Charging time differs depending on the environment and the battery itself.
12) Charging LED may not light up if the battery is not installed properly. Remove the battery
and install it again.
13) Do not unplug the AC adapter during printing regardless of the amount of the remaining
battery.
14) Print density may differ depending on the environment or battery amount (voltage).
15) When the temperature differs between the battery and the environment, the remaining
amount is not indicated correctly. You are recommended to leave the battery in the
environment where it will be used for a while before use.
16) When exchanging the battery, make sure to turn the power off in advance.
17) Be sure to use the POWER button to turn the power off. If the battery is disconnected
while the printer is operated with the battery or if the AC adapter is disconnected while the
printer is operated with the AC adapter, the wireless communication may be not work the
next time of use.
END
H