Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
TM-P60
Specification
(STANDARD)
E
4 3
1.6 Roll paper Supply Device
1) Supply method: Drop-in roll paper
2) Paper width selection: 58 mm {2.28"} or 60 mm {2.36"} is selectable with or without the roll
paper spacer. The spacer setting is the default setting.
NOTES: 1. Be sure to set the paper width with the memory switch to adjust printing to the print
width.
2. Never change the paper width from 58 mm {2.28"} to 60 mm {2.36"} once you have
set the paper width to narrow.
1.7 Paper Specifications
1) Paper type: Specified thermal paper
2) Paper thickness: 50 μm to 80 μm
3) Paper width: 58 mm paper width model: 57.5 ± 0.5 mm {2.26 ± 0.02"}
60 mm paper width model: 59.5 ± 0.5 mm {2.34 ± 0.02"}
4) Form: Roll paper
5) Roll paper size: Roll diameter: Maximum 51 mm {2.01"}
Roll paper width: For 58 mm: 58 mm +0/–1.0 mm
For 60 mm: 60 mm +0/–1.0 mm
6) Specified roll paper number
Paper width (width of the liner)
Paper type
58 mm 60 mm
Remarks
Continuous label
paper
-- ETLB060050000
7) Specified original paper type no.:
The following original paper can be used for receipts:
TF50KS-E (paper thickness: 65 μm)
(NIPPON Paper Industries Co.,Ltd.)
• U.S.A.:
P350 (paper thickness: 62 μm) Kanzaki Specialty Paper (USA)
P310 (paper thickness: 58 μm) Kanzaki Specialty Paper (USA)
P300 (paper thickness: 56 μm) Kanzaki Specialty Paper (USA)
8) Roll paper spool outside diameter
18 mm {0.71"} or more
NOTE: Paper must not be pasted to the roll paper spool.
9) Arrangement of the roll paper end
A red line that indicates the paper end (its length is decided by users) is
recommended to be preprinted on the end of the roll paper.
G