Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
TM-P60
Specification
(
STANDARD
)
12 11
E
2. INTERFACE
The printer has 2 interfaces, the serial interface and the wireless interface.
The wireless interface supports either of two-types – IEEE802.11b or Bluetooth.
When the printer is connected with the RS-232 serial cable and the power is turned on, communication
by the RS-232 serial interface is enabled, and communication by the wireless interface is disabled at
that time.
When the printer is not connected with the RS-232 serial cable and the power is turned on,
communication by the wireless interface is enabled, and communication by the RS-232 serial interface
is disabled.
2.1 RS-232 Serial Interface
2.1.1 Specifications (RS-232 compliant)
Data transmission: Serial
Synchronization: Asynchronous (asynchronous)
Handshaking: DTR/DSR or RTS/CTS control
Selectable with DIP SW
Signal levels: MARK = -3 to -15 V: Logic "1"/ OFF
SPACE = +3 to +15 V: Logic "0"/ ON
Communication speed: 9600, 19200, 38400 bps
(bps: bits per second)
Data word lengths: 8 bits
Parity settings: None, even, odd
Stop bits: 1 bit or more
NOTES: 1. The communication speed and parity depend on the memory switch settings.
2. The stop bit of transmission data from the printer side is fixed to 1.
2.1.2 Serial interface connector
Printer side: RL01-R12P-E1000 (JAE)
Use specified RS-232 cable (type: OT-RS60).
Serial interface
connector