Specifications

Restoring the Settings on your Computer
1. Enter the Wireless Network Connection Properties window.(see Accessing
your Wireless Network Settings)
2. From the General tab, open the Properties for TCP/IP.
3. Change the IP settings back to normal (usually Obtain an IP address
automatically)
4. Press OK.
5. From the Wireless Networks tab, press the Advanced button.
6. Restore the settings to their previous state (usually Any available network)
7. Keep the new network settings in case you reset the printer later.
8. Press OK to return to the Network Connections window. (If you do not
normally connect through a wireless network, you are now finished)
9. Double-click on Wireless Network Connection.
10. Select your network and press connect.
Using your Printer from within Mobile Suite
Selecting the Printer
1. Open Mobile Suite on your PDA.
2. Select Label Printing.
3. Go to the Options tab.
4. Tap on the Setup button by Printer.
5. Under Printer, select Epson TM-P60. (figure 16)
6. Under Port, select Network: IP Printer. (figure 16)
7. Color should automatically be set to Monochrome, and the paper orientation
and size should self-adjust to the default paper size.
8. Tap on Set Printer IP (at the bottom). (figure 16)
9. Enter the IP address under IP Printer Address. (figure 17)
10. Tap Save.
11. Press Save Settings to return to the Options tab.
Figure 16
Figure 17