Specifications

Configuring the Printer to Match your Network
Changing the Configuration of your Printer
1. Click on Administrator under Options.
2. Change IP Address resolution printing to Enable.
(figure 13)
3. Click SUBMIT.
Figure 13
NOTE: The printer will always inform you when the settings have been saved
successfully. They will take effect after a reset. At this point, do not reset the
printer.
4. Go to the TCP/IP configuration.
5. Change Get IP Address to Static. (figure 14)
6. Enter the desired IP address, along with the Subnet Mask and default Gateway.
This information can be obtained from your router or from a network
administrator.
7. Click SUBMIT.