User`s manual

The TM-T20 Utility is started. When the communication with the printer is

established, the printer settings obtained from the printer are displayed in the

[Printer settings] screen.

To recognize the connected printer when connected via USB, run the [Test Printing] after running TM-

T20 Utility, or check the serial number on one of the sides of the printer and the serial number of TM-

T20 Utility.

When executing TM-T20 Utility for the first time, it does not boot if the communication with the printer

cannot be established. Once the communication is established, the utility can boot using the

previous printer setting information even if it is offline.