User`s manual

11
Chapter 2 Using the Utility
2
Adding a Communication Port and Starting the TM-T20 Utility
Add a communication port as follows:
1
Select [Start] - [All Programs] - [EPSON] - [TM-T20 Software] - [TM-T20 Utility].
2
The following screen appears. Click the [Add Port] button.
3
The [Add Port] screen appears. Configure the port to be added. Then, click the
[OK] button.
• If the communication with the port failed, an error message appears. In such case, you cannot add
the port. Make sure the printer is connected properly and check your communication settings.
• Clicking the [Communication test] button displays the communication result on the screen. It does
not conduct a test print.