User`s manual

21
Chapter 2 Using the Utility
2
3
The [Logo Edit] screen appears. Edit the logo image while checking the image
previewed on the upper portion of the screen. When finished, click the [OK]
button.
You can edit the followings.
4
If the logo mode is [First Key-code Selection Mode] and [Automatically set the
keycode for the logo to be stored.] is not turned on, the "Key-code Settings" screen
is displayed. Set a Key-code and click the [OK] button.
If the logo mode other than [First Key-code Selection Mode] is selected or [Automatically set the
keycode for the logo to be stored.] is turned on, the "Key-code Settings" screen is not displayed.
Setting Description
Image width Specifies the width to which the image is resized (in mm).
Resize Specifies whether or not the image is resized. If the image width is
greater than the paper width and resizing is not specified, the part of
the image that exceeds the paper width will be cut off.
Half toning Configures the halftone setting of the image.
Brightness Configures the brightness of the image.