Instruction manual

1-8 Product Overview Rev. A
1.4.1.2 Replacing Paper
Follow the procedure below to replace roll paper.
1. Open the printer cover, and remove the core of the previously used roll paper.
2. Insert the new roll paper following the procedure in “Installing Roll Paper” (page 1-6).
1.4.2 Removing Jammed Paper
CAUTION:
Do not touch the thermal head because it can be very hot after printing.
For handling the thermal head, refer to TM-T70 User’s Manual.
1. Turn the printer off and press the cover open lever.
2. Remove jammed paper, reinstall the roll, and close the cover.
1.4.3 Power Switch Cover
Install the power switch cover that comes with the TM-T70 onto the printer to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance
of the printer.
To reset the TM printer when the power switch cover is installed, insert a long, thin object (such
as the end of a paper clip) into the hole in the power switch cover and press the power switch.
Note:
If an accident occurs with the power switch cover attached, unplug the power cord immediately.
Continued use may cause fire or shock.
Power switch cover