Instruction manual

Rev. A Setup 2-1
TM-T70 Technical Reference Guide
Chapter 2
Setup
Before using the printer, you need to make various settings to increase the printer's
functionality. Configure the printer appropriately depending on the environment.
Figure 2-9 Setup flowchart
2.1 Installing the Printer
You can install this printer only horizontally.
❏ Install the printer in a flat, horizontal position.
❏ Avoid locations susceptible to dust and other foreign matter.
❏ Be sure to avoid bumping so that the printer is not exposed to strong impact during
operation.
❏ Avoid placing the printer on top of the power supply or other cables or other objects.
1. Install the printer (page 2-1)
4. Connect the power supply and cash drawer (page 2-14)
3. Connect the printer to the host computer (page 2-7)
Detailed setup
2. Set the DIP switches (page 2-3)
End
5. Install the driver (page 2-16)
Note: Detailed setup sometimes
can be omitted.