Instruction manual

Rev. A Product Specifications 5-1
TM-T70 Technical Reference Guide
Chapter 5
Product Specifications
5.1 Product Specifications (TM-T70)
5.2 Print Specifications (TM-T70)
Table 5-16 Specifications
Print method Thermal line printing
Print width Standard: paper width of 80 mm —
print width of 72 mm {2.84"}, 512 dot positions
Cut type Partial cut (left-most one point uncut)
Character sets 95 alphanumeric, 48 international characters, 128 × 11 pages of extended graphics
Interface (compatible) Serial (RS232/RS485)/ Parallel (IEEE1284)/ Ethernet (10/100BASE-T)/ USB (Full)/ Wireless
LAN (802.11b)
Buffer Receive buffer: 4KB/45 bytes (Selectable with the DIP switches)
User-defined buffer
For both downloaded bitmap images and fonts: Approx. 12KB
NV graphics data storage area: 256KB NV user memory: 1KB
DKD function 2 drives
Power supply Power supplied by optional AC adapter: PS-180
Operating voltage 24 VDC ± 7%
Current consumption High-speed mode
Average: Approx. 1.8 A
(Font A, α-N, 36 capital letters, rolling pattern, 42-column printing)
Low-power mode
Average: Approx. 1.2 A
(Font A, α-N, 36 capital letters, rolling pattern, 42-column printing)
Standby:
Average: Approx. 0.1mA (Note: The maximum drawer kick-out drive current is 1
A.)
Temperature/humidity Operating: 5 to 45°C (41 to 113°F), 10 to 90% RH
Storage: Shipped packed state –10 to +50°C (14 to 122°F), 10 to 90% RH
Weight Approx. 1.8 kg {3.968 lb}
Table 5-17 Print characteristics
Characteristics Specifications
Print method Thermal line printing
Paper feed method Unidirectional with friction feed
Print width 72 mm {2.84"} (80mm paper width model)
Characters per line See table titled “Print width/characters per line,” below.
Print speed See table titled “Print speed,” below.
Paper feed speed See table titled "Specifications".
Carriage return width 4.23 mm or 1/6"