Instruction manual

iv Rev. A
Cautions
CAUTION:
❏ Be sure to set this equipment on a firm, stable horizontal surface. Product may break
or cause injury if it falls.
❏ Do not use in locations subject to high humidity or dust levels. Excessive humidity and
dust may cause equipment damage, fire or shock.
❏ Do not place heavy objects on top of this equipment. Never stand or lean on this
equipment. Equipment may fall or collapse, causing breakage and possible injury.
❏ To ensure safety, unplug this equipment prior to leaving it unused for an extended
period.
❏ Parts on the circuit board may become hot during operation. Wait approximately 10
minutes after turning the power off before touching them.
❏ To avoid injury, take care not to insert fingers or any part of the hand in the roll paper
opening where the manual cutter is installed.
❏ Do not open the roll paper cover without taking the necessary precautions, as this
can result in injury from the autocutter fixed blade.
❏ Do not use aerosol sprayers containing flammable gas inside or around this product.
Doing so may cause fire.
❏ The thermal head can be very hot during printing and immediately after printing.
Toutching it may cause burns. Be sure to do cleaning and other work after the
thermal head cools down.
Modular Connectors
The printer uses the modular connectors specifically designed for the cash drawer. Do not
connect these connectors to an ordinary telephone line.
EMC and Safety Standards Applied
Product Name: TM-T70
Model Name: M255A
The following standards are applied only to the printers that are so labeled. (EMC is tested using
the Epson power supplies.)
Europe: CE marking
Safety: EN 60950-1
North America: EMI: FCC/ICES-003 Class A
Safety: UL60950-1/CSA C22.2 No. 60950-1
Oceania: EMC: AS/NZS CISPR22 Class B