Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
3 2
TM-T88III series
Specification
(STANDARD)
E
NOTES: • There may be variations in printing after switching the mode of the printing speed. To
prevent this for logo printing with ESC ∗
∗∗
∗ command, using a downloaded bit image is
recommended. Change in printing speed does not occur during down loaded bit image
printing.
• Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
• Low transmission speed may cause intermittent printing. It is recommended to transmit
data to the printer as quickly as possible.
• High speed mode or low power consumption mode is selected by a DIP switch. (Refer to
Table 3.3.4 and 3.3.7).
8) Paper feed speed: Approximately 150 mm/s {approximately 5.9"/s}
(continuous paper feeding)
9) Line spacing (default): 4.23 mm {1/6"}
Programmable by control command.
1.2 Character Specifications
1) Number of characters: Alphanumeric characters: 95
Extended graphics: 128 × 11 pages
(including one space page)
International characters: 37
Japanese model: JIS (JIS X0208-1990):
Level 1: 3489
Level 2: 3390
Multilingual character model supports printing with one of the following
character sets:
➀ Simplified Chinese (GB18030-2000)
28,553 (∗ International characters: 48)
➁ Traditional Chinese (Big 5)
13494
➂ Thai characters (3-pass printing font)
128 characters × 7 pages
(133 character types)
➃ Korean Kanji (KS C5601)
8366
2) Character structure: Font A: 12 × 24 (including 2-dot spacing in horizontal)
Font B: 9 × 17 (including 2-dot spacing in horizontal)
Kanji: 24 × 24
Thai font: 12 × 72, 9 × 51
Font A is selected as the default