Specifications

Confidential
TITLE
SHEET
REVISION
NO.
SHEETNEXT
E
TM-T88III series
Specification
(STANDARD)
EPSON
GENERAL FEATURES
This specification applies the following models of the TM-T88III series printer:
TM-T88III (with serial interface (*1))
TM-T88IIIP (with parallel interface)
The following models support the listed paper widths and character sets.
• Paper width type: 1) 80 mm paper width model
2) 58 mm paper width model (*)
(*) The 58-mm paper width model is supported only by the ANK and Japanese models.
• Character supporting: 1) Alphanumeric (ANK) model
2) Japanese model
2) Multilingual model (*)
(*) The multilingual character model supports printing with one of the following character
sets:
➀ Simplified Chinese
➁ Traditional Chinese
➂ Thai
➃ Korean
The printer has the following features:
1) Printing
• High speed printing: approximately 35.5 lps (4.23 mm {1/6"} feed) maximum. [lps: lines per second]
• Low-noise thermal printing.
• High reliability due to a stable mechanism.
2) Application Software
• Command protocol is based on the ESC/POS
£
standard.
• Various Layouts are possible by using page mode.
• Characters can be scaled up to 64 times as large as the standard size. Smoothing is also possible.
• Bar code printing is possible by using a bar code command. Bar codes can be printed both in the
vertical direction (fence bar code) and in the horizontal direction (ladder bar code) (*2).
• Repeated operation and copy printing are possible by using macro definitions.
• Character font size (12 × 24 font or 9 × 17 font) can be selected using a command.
3) Printer Handling
• Easy paper roll setting.
• Equipped with an autocutter.
• The printer allows easy maintenance for tasks such as head cleaning.
• Three different print densities can be selected by DIP switches.
• The built-in interface provides control capability for two drawers.
NOTES) *1: An RS-485 serial interface is a factory option.
*2: The ladder bar code is effective only in the page mode.
IIIII