Specifications

44
For Ethernet/Wireless LAN/USB Interface
DIP Switch Bank 1
DIP Switch Bank 2
SW Function ON OFF
Factory
setting
1-1 Auto line feed Always enabled Always disabled OFF
1-2 Receive buffer capacity 45 bytes 4 KB OFF
1-3 
1-8
Undefined — OFF
SW Function ON OFF
Factory
setting
2-1 Handshaking (BUSY condition) Receive buffer full
 Offline
 Receive buffer full
OFF
2-2
Reserved (Do not change
setting)
Fixed to OFF OFF
2-3 
2-4
Selects print density
See "Selecting the Print Density (DIP Switches
2-3/2-4)" on page 45.
OFF
2-5
Sets the release condition of the
receive buffer BUSY state. (This
function is effective when DIP
Switch 1-2 is set to off.)
Releases the BUSY
state when the
remaining capacity
of the receive buffer
reaches 138 bytes.
Releases the BUSY
state when the
remaining capacity
of the receive buffer
reaches 256 bytes.
OFF
2-6 
2-7
Reserved (Do not change
settings)
Fixed to OFF OFF
2-8
Reserved (Do not change
setting)
Fixed to ON ON
 For DIP Switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 46.
 Do not change the setting of DIP switches 2-2, 2-6, and 2-7. Otherwise, the printer may
not operate normally.