Specifications

Setting the print speed

Selectable from levels 1 to 13 (Slow  Fast) (initial setting: level 13)

Setting font

•Code page: Selectable from 43 pages including user defined page

•International character set: Selectable from 18 sets

•Font A/B replacement

Optional Buzzer

When to sound the buzzer is selectable from the following occasions.

•When an error occurs

•When automatic paper cut activates

•When specified pulse 1 (2 pin) occurs

•When specified pulse 2 (5 pin) occurs

USB Class

•Printer Class

•Vendor Class

Depending on print conditions, such as print duty, print head temperature, and data

transmission speed, print speed is automatically adjusted, which may cause white lines due

to intermittent print (the motor sometimes stops). To avoid this, keep the print speed

constant by setting it lower, or set the transmission speed higher for the serial interface.

(See "Transmission Speed (DIP Switches 1-7/1-8)" on page 40.)