Specifications
Chapter 2 Setup
69
2
5
Peel off the sticker on the other side of the affixing tape, and attach and
fix the optional external buzzer to the printer case.
6
Turn on the printer.
7
Make settings for the optional external buzzer on the printer.
Adjusting the Buzzer Volume
Turn the volume adjustment knob to adjust the buzzer volume.
Setting the Optional External Buzzer
When and how to beep can be set by the driver, TM-T88V Utility or the printer's customized
value. (See "Setting the Memory Switches (Customized Value)" on page 48.)
To use this product, be sure to enable the optional external buzzer with the printer set-
ting. For the details on the setting, see the Technical Reference Guide for each printer.
When the optional external buzzer is enabled with the printer setting, the drawer cannot
be driven.
Printer case
Volume adjustment knob
High
Low