Specifications

Selecting the Print Density (DIP Switch 2-3/2-4)

Paper type Print density SW 2-3 SW2-4

Recommended liner-free

label

Fixed ON ON

Thermal roll paper

Print density (Standard) OFF OFF

Print density (Darker than standard) ON OFF

Print density (Dark) OFF ON

• If the print density is set to “Darker than standard” or ”Dark” level when using the thermal

roll paper, printing speed may be reduced.

• The print density can be set with DIP switches (2-3/2-4) or to the customized value. (See

"Setting the Memory Switches" on page 42.) The initial setting of the customized value is

“Depends on the DIP switch settings.” If the customized value is changed, the value set

with the customized value is enabled.