Specifications

58
Precautions on Using a Driver
When using a driver (APD or OPOS ADK) for the ReStick model, it is recommended to set
Memory switches 5-2 to 5-4 to OFF.
If you use an APD/OPOS driver for the standard/ReStick model while Memory switch 5-2 is set
to ON, there are the following limitations on printing. (Check the operation of the driver before
using it, since unexpected problems other tha
n those described below may occur.)
Using the APD when Memory switch 5-2 is ON
APD for the standard model
If more than 45 digits (including spaces) of the device font are printed per line, a line feed is
inserted.
APD for the ReStick model
•Character and graphic size and paper feeding amount are smaller than when printing with the
standard model TM-T88IV.
•Depending on the application, characters may be printed in unexpected positions.