User`s manual

B
The EpsonNet Config screen appears.
Check that the target printer is listed in the screen.
C
Select the printer you want to configure, then click the Configuration button.
When the printer does not appear, click the Refresh button.
D
The Device Properties screen appears. Select the Network Interface - Network - Basic(Wireless).
E
Set the wireless LAN.
If the communication mode is Ad Hoc. Proceed to Step 6.
If the communication mode is Infrastructure. Proceed to Step 7.
F
When the communication mode is Ad Hoc, the wireless LAN settings are as follows. When finished
configuring the settings, go to step 8.
TM-T88V Software Installer Software User's Manual
Installation
21