User`s manual

Setting Description
When specified pulse 2 (5 pin) occurs: Configure the buzzer setting when the specified pulse is generated. To
test the buzzer sound, click the Test button.
D
Click the Set button. The settings are reflected in the printer.
Communication I/F Settings
This utility allows you to make printer communication settings. The port setting of the computer is not made, so
making the printer settings may cause a communication error with the printer. In such case, change the printer driver
settings or any other necessary settings on the computer so that they match with the settings made on the printer.
A
Click the Communication I/F menu. The type of port currently used for communicating with the printer is
automatically detected and displayed on the Communication I/F Settings screen.
B
Make the communication settings.
Serial Configures the serial communication. U See “Serial” on page 86
USB Configures the USB communication. U See “USB” on page 87
Ethernet Configures the IP address. U See “Ethernet” on page 89
C
Click the Set button. The settings are reflected to the printer.
Serial
Configures the serial communication.
❏ When the Communication speed is 38400 bps or lower
Referring to the preview on the right of the screen, change the DIP switch setting on the printer. Turn off the
printer power when changing DIP switch settings.
TM-T88V Software Installer Software User's Manual
TM-T88V Utility
86