User`s manual

❏ When the Communication speed is 38400 bps or higher

Turn off the printer power. After turning on the printer DIP switches 1 - 7 and 1 - 8, turn the printer back on. Then

start TM-T88V Utility.

Setting Description

Communication speed: Selects the communication speed.

Depend on DIP Switch Selects which communication speed setting to use between DIP switch setting

and memory switch setting. Place a checkmark to use the DIP switch setting.

Deselect it to use the memory switch setting.

Parity: Configures the parity.

Data Bit: Configures the data bit.

Stop Bit: Configures the stop bit.

USB

Configures the USB class.

Note:

❏ When using the UPOS or Advanced Printer Driver Ver. 3.04, select Vender Class.

❏ When you do not need to use the Printer Class, using Vender Class is recommended.

❏ To change to Printer Class, the Built-in USB and USB Plus Power must have been installed.

TM-T88V Software Installer Software User's Manual

TM-T88V Utility