Specifications

Confidential

EPSON

TITLE

SHEET

REVISION

NO.

SHEETNEXT

TM-U210 series

Specification

(STANDARD)

62 61

6.3 Command Descriptions

[Name] Horizontal tab

[Format] ASCII HT

Hex 09

Decimal 10

[Description] Moves the print position to the next horizontal tab position.

[Notes] • This command is valid only when the receive buffer capacity is 40 bytes (when

DIP switch 1-2 is on).

• This command is ignored unless the next horizontal tab position has been set.

• If the next horizontal tab position is outside the printing area, the printing

position shifts to "printing area width + 1."

• Horizontal tab positions are set with ESC D.

• The default tab positions are at intervals of 8 characters (columns 9, 17, 25.) for

font B (7 × 9).

[Reference] ESC D

[Name] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Description] Prints the data in the print buffer and feeds one line, based on the current line

spacing.

[Note] This command sets the print position to the beginning of the line.

[Reference] ESC 2, ESC 3