Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
100 99
ESC c 3 n
[Name] Select paper detector(s) to output paper end signals
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper detector(s) to output paper end signals, using n as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Paper roll near-end sensor disabled.
On 01 1 Paper roll near-end sensor enabled.
1 Off 00 0 Paper roll near-end sensor disabled.
On 02 2 Paper roll near-end sensor enabled.
2 Off 00 0 Paper roll end detector disabled.
On 04 4 Paper roll end detector enabled.
3 Off 00 0 Paper roll end detector disabled.
On 08 8 Paper roll end detector enabled.
4 - - - Undefined
5 - - - Undefined
6 - - - Undefined
7 - - - Undefined
[Details] • It is possible to select multiple detectors to output signals. Then, if any of the detectors
detect a paper end, the paper end signal is output.
• This command is ignored in the serial interface model.
• The timing to detect the state of the sensor that is selected may differ in each model.
[Default] n = 15