Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
2 3
Table 1.2.1 Character Dimensions, Characters Per Inch, Characters Per Line
Character configuration
Character
dimensions
Characters
per line
Characters per
25.4 mm {1"}
Horiz. × Vert. Character type W × H (mm)
Dot spacing
between
characters
(cpl) (cpi)
ANK 1.2 × 3.1 3 half dots 40 16
7 × 9
Graphics 1.7 × 3.1 0 40 16
ANK 1.6 × 3.1 3 half dots 33 13.3
9 × 9
Graphics 2.0 × 3.1 0 33 13.3
ANK 1.2 × 3.1 2 half dots 42 17.8
7 × 9
Graphics 1.6 × 3.1 0 42 17.8
ANK 1.6 × 3.1 2 half dots 35 14.5
9 × 9
Graphics 1.9 × 3.1 0 35 14.5
0 25 9.5
9 × 9
Kanji
Korean Kanji
2.7 × 2.7
2 22 (*1) 8.9
7 × 27 Thai characters 1.2 × 9.5 3 half dots 40 16
9 × 27 Thai characters 1.6 × 9.5 3 half dots 33 13.3
7 × 27 Thai characters 1.2 × 9.5 2 half dots 42 17.8
9 × 27 Thai characters 1.6 × 9.5 2 half dots 35 14.5
(*1) Selectable by software command (default value is 22)
NOTE: The default font is 7 × 9; the dot spacing between characters for 3 half-dots or 2 half-dots can
be set by changing the DIP switch settings.
ANK = Alphanumeric characters
Example: 7 × 9 font (with three-dot spacing)
2.4.
0.353
0.159
1.5871.24
3.1
[Units: mm]
Figure 1.2.1 7
×
××
×
9 Font