Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
118 117
FS ! n
[Name] Set print mode(s) for Kanji characters
[Format] ASCII FS ! n
Hex 1C 21 n
Decimal 28 33 n
[Range] 0 ≤ n ≤ 255
[Description] Sets the print mode for Kanji characters, using n as follows:
Bit Off/On Hex Decimal Status for ASB
0 - - - Undefined.
1 - - - Undefined.
Off 00 0 Double width mode disabled.
2
On 04 4 Double width mode enabled.
Off 00 0 Double height mode disabled.
3
On 08 8 Double height mode enabled.
4 - - - Undefined.
5 - - - Undefined.
6 - - - Undefined.
Off 00 0 Underline mode disabled.
7
On 80 128 Underline mode enabled.
[Details]
•
This command is valid only for the Japanese Kanji model, Chinese Kanji model, and
Taiwanese Kanji model, and Korean Kanji model.
•
When both double-width and double-height modes are set (including right- and left-side
character spacing), quadruple-size characters are printed.
•
The printer can underline all characters (including right- and left-side character spacing), but
cannot underline the space set by
HT
.
[Default] n = 0
[Reference]
FS
−
−−
−
, FS W