Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
119 118
FS &
[Name] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects Kanji character mode.
[Details] For Japanese Kanji supporting model:
•
This command is effective only when the JIS code system is selected.
•
When Kanji character mode is selected, the printer processes each two-byte sequence as a
Kanji character code.
•
Kanji codes are processed in the order of the first byte and second byte.
•
Kanji character mode is not selected when the power is turned on.
•
Using
FS C
, the Kanji character code system is selected.
For Chinese/Taiwanese/Korean Kanji supporting model:
•
When kanji character mode is selected, the printer checks whether the code is Kanji or not,
then processes the first byte and the second byte, if the code is Kanji.
•
Kanji codes are processed in the order of the first byte and second byte.
•
Kanji character mode is selected when the power is turned on.
[Reference]
FS ., FS C
FS −
−−
− n
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS − n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description] Turns underline mode for Kanji characters on or off, based on the following values of n:
n Function
0, 48 Turns off underline mode for Kanji characters
1, 49 Turns on underline mode for Kanji characters (1-dot thick)
[Details]
•
This command is valid only for the Japanese Kanji model, Chinese Kanji model, and
Taiwanese Kanji model, and Korean Kanji model.
•
The printer can underline all characters (including right- and left-side character spacing), but
cannot underline the space set by
HT
.
[Default] n = 0
[Reference]
FS !