Specifications

Confidential

EPSON

TITLE

SHEET

REVISION

NO.

SHEET

TM-U230

Specification

(STANDARD)

5 6

1.7 Printing Area

1) Roll paper

Maximum of 200 dots,

400 positions

Note

63.34

(6.76) (5.9)

[Units: mm]

Cutting position (autocutter)

Figure 1.7.1 Printing Area

NOTE: The values shown for the printing area are the values calculated (between dot centers) based

on the wire diameter (0.29 mm {0.0011"}).

1.8 Receive Buffer

Either 16KB or 1KB can be selected by DIP switch.

1.9 Electrical Characteristics

1) Supply voltage: +24 VDC ± 10%

NOTE: If any one of the following power supplies PA-6508, PA-6511, PA-6513, PB-6509,

or PB-6510 is used, the supply voltage is approximately 24 – 34 V.

2) Power consumption (when the AC adapter PS-180 is used):

Operating: Mean: Approximately 1.0 A (character font 7 × 9, α-N printing)

Peak: Approximately 2.5 A

Standby: Mean: Approximately 90 mA (when the internal buzzer is off)

Approximately 100 mA (when the internal buzzer is on)