Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
27 28
2.1.3.8 Internal Communications Parameters
Item List
Telnet HTTP
Status
printout
Item Parameter Initial value
Ref. Setting Ref. Setting Ref.
IP address 192.168.192.168
{ { { { {
Subnet mask 255.255.255.0
{ { { { {
Gateway address 255.255.255.255
{ { { { {
RARP function Enable/Disable Disable
{ { { { {
BOOTP function Enable/Disable Disable
{
{ { { {
DHCP function Enable/Disable Disable
{
{ { { {
arp/ping IP setting Enable/Disable Enable
{
{ { {
×
Community name 1
(read-only)
Max. 16
characters
“public”
{
×
{
×
{
Community name 2
(read-write)
Max. 16
characters.
None
{
{ { { {
Community name
(IP Trap #1)
None
× ×
{ {
×
Community name
(IP Trap #2)
None
× ×
{ {
×
IP Trap #1 Address None
× ×
{ {
×
IP Trap #2 Address None
× ×
{ {
×
Password None
×
{
×
{
×
Hardware version
{
×
{
×
{
Firmware version
{
×
{
×
{
MAC address
{
×
{
×
{
1) Internal Parameter Setting Methods
Using an HTTP browser
Using Telnet
Using ENPC protocol
Using arp and ping commands (only to set IP address)
2) Setting with HTTP browser
Settings can be made by an HTTP browser when connected to the module.
The new IP address takes effect when the printer power is turned off and back on.
3) Setting with Telnet
Settings can be made by Telnet when a Telnet client is in a normal communications state with the
module.
The new IP address takes effect when the printer power is turned off and back on.
4) EN Setting with ENPC
As the ENPC protocol is used, special application software is required.
EPSON provides a dedicated utility which can be used to make miscellaneous settings employing
the ENPC protocol.