Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
28 29
5) Setting the IP address with arp + ping
This function is available only when it has been enabled.
The setting can be made only from a host in the same segment as the module.
The host must support both arp and ping commands.
The new IP address takes effect when the module responds to the ping command.
Example-1: using SunOS
arp –s 123.456.789.123 00:00:85:06:00:01 temp
ping 123.456.789.123
Example-2: using Windows
arp –s 123.456.789.123 00-00-85-06-00-01
ping 123.456.789.123
How to check the MAC Address
The MAC address of the UB-E01 can be checked with any of the following methods:
(1) Printing the status sheet
(2) Checking the seal on the PCB
(3) Checking the printer self-test
2.1.3.9 Initializing
A standby period is required before the network functions become operational when the UB-E01
power is turned on or following intialization as a consequence of a reset.
Standby period: Approximately 20 seconds
No network functions will work during this standby period.