Specifications

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEET NEXT
D
TM-U230
Specification
(STANDARD)
31 32
2) Drawer kick-out drive signal
Output signal: Voltage: Approximately 24 V
Current: 1 A or less
CAUTION: To avoid an overcurrent, the resistance of the drawer kick-out solenoid must be
24Ω or more.
Output waveform: Outputs the waveforms in Figure 2.2.6 to points A and B in Figure 2.2.7.
(The ESC p command specifies ON time t1 and OFF time t2.)
t1
×
2
µ
σ t2
×
2
µ
σ
Figure 2.2.6 Drawer Kick-out Drive Signal
NOTE: ON time cannot be set less than 100 ms.