Specifications

Confidential

EPSON

TITLE

SHEET

REVISION

NO.

SHEET

TM-U230

Specification

(STANDARD)

88 87

• The setting values of this command are continuously effective until either of the following

conditions is executed.

a) Resetting by this command.

b) A command that causes a software reset is executed.

c) Power off or hardware reset.

• The setting values of this command are not initialized with ESC @.

• If the printer receives Function 97 of this command during the beeping of the internal buzzer,

the printer stops beeping the internal buzzer, and processes the Function 97. After

processing it, the printer restarts beeping the internal buzzer again.

[Notes] • The PAPER OUT LED does not turn on even if the paper end is detected when the

parameters are set as follows:

a = 48: Paper roll near-end sensor detects the paper near end.

c = 0: Does not beep the internal buzzer.

[Reference] ESC c 4