User`s manual

Setting Up the Printer 1-9
Make sure that the ribbon is installed in front of the print head
without wrinkles or creases. If it is hard to see, open the print
head cover as described in Chapter 3.
If the ribbon is not installed correctly, remove the cassette as
described below and repeat steps 2 and 3 above.
Note:
To remove the ribbon cassette, grasp the ribbon cassette's tab and
pull it out of the printer. See the illustration in step 2 above for the
location of the tab.
IInstalling the Paper Roll
Use a paper roll that matches the printer's specifications. See
Chapter 4 for paper specifications.
1. Make sure that the edge of the paper is straight, as shown on
the left side of the illustration.
2. Turn on the printer and open the printer cover.
U925_eng.book Page 9 Thursday, July 25, 2002 9:15 AM