User`s manual

Setting Up the Printer 1-11
Note:
To remove the paper roll, hold down the paper release lever (marked
PRESS) and pull out the paper roll in the direction shown in the
illustration.
Self Test
The self test lets you know if your printer is operating properly.
You can run the self test with either roll paper or slip paper.
Running the self test with roll paper
1. Make sure the printer is turned off and the printer cover is
closed properly.
2. While holding down the RECEIPT FEED button, turn on the
printer to begin the self test. The self test prints the printer
settings and then pauses. (The RECEIPT OUT light blinks.)
3. Press the RECEIPT FEED button to continue printing. The
printer prints a pattern using the built-in character set.
4. The self test automatically ends after printing the following:
*** completed ***
Paper release lever
U925_eng.book Page 11 Thursday, July 25, 2002 9:15 AM