User`s manual

Troubleshooting 3-7
CAUTION:
Make sure you lock the cutter unit with both OPEN <->
LOCK levers.
10. Install the paper roll following the steps in Chapter 1; then
close the printer cover.
Cleaning the MICR Mechanism
Foreign matter on any part of the MICR mechanism can cause
MICR reading errors.
Cleaning the MICR mechanism is simple. First, send the cleaning
command (FS c) to the printer. Then insert the special MICR
cleaning paper the same way you insert a check.
The printer feeds the paper through, cleaning the MICR head,
roller, and paper path.
Perform this cleaning once a month or after every 6,000 checks .
Use a special MICR cleaning paper such as the KIC Products
PRESAT brand check reader cleaning card or the equivalent. The
size should be 63 x 152 mm (2.48 x 5.98”). (USA only)
OPEN
LOCK
U925_eng.book Page 7 Thursday, July 25, 2002 9:15 AM