Specifications

16. Using Peripherals with the USN52 L

Page 110 USN52 L Operating Manual

To change the RS-232 protocol:

1. If necessary, select lower level menu:

2. Frame the column containing the RS-232 protocol functions:

or ; or

3. Select BAUD RATE, LENGTH, and PARITY to match the

requirements of the device connected to the RS-232 I/O port:

16.3 Printing a HARD COPY of the Display

NOTE: Output is formatted for the Epson FX-850 dot

matrix printer, with Intelligent Serial Interface Number 8148,

and other fully compatible printers.

Required cable: Product Code 022-505-518

This operation prints a facsimile of the USN52 L display at the time

is pressed.

Connect the printer to the RS-232 I/O port of the USN52 L, using

the cable specified in the note above. If necessary, set RS-232

protocol by following the procedure in Section 16.2.

To print a HARD COPY of the display:

1. Select lower level menu:

2. Frame the column, which contains the COPY MODE func-

tion,

or ; or

3. Set COPY MODE to HARD COPY:

4. Return to the A-scan display:

5. Prepare the display to be printed. There are a number of

possibilities. You may:

a. Select the menu, if any, that should appear with the A-

scan in the printout:

b. Expand the A-scan horizontally:

c. Display the gated portion of the A-scan:

d. Display measurement data or data logger status in the

measurement line and enlarged value display areas.