Specifications

16. Using Peripherals with the USN52 L
USN52 L Operating Manual Page 111
6. With the desired image and data in the USN52 L display,
initiate the printout:
The USN52 L “captures” the image at the instant the COPY key is
pressed. Although the A-scan display remains active, the printed
image will show the display as it was when the COPY key was
pressed. USN52 L keypad controls are disabled until the printout
has been completed.
16.4 Printing a Data Logger Report
USN52 L Data Logger files are transmitted in an ASCII text format
to a compatible serial printer. The 24 column report format is com-
patible with any 24, 40, 80 or 132 column serial printer, provided
the proper cable is used.
Reports are printed in the language selected via the LANGUAGE
function (lower level menu).
Before printing, connect the printer to the RS-232 I/O port. For
most serial printers, use the standard USN 50 - Serial Printer cable.
If the Data Logger is enabled (ref. Section 15.4) a Data Logger
report showing contents of the currently selected file can be printed
while the A-scan is displayed. Only the currently selected file will
be reported.
Reports showing other files, or all files, must be selected and printed
using the Data Logger functions (lower level menu).
To print a report from the A-scan display, showing contents and
statistics from the currently selected file (Data Logger must be
enabled, with LOC: and VAL: values displayed in the measure-
ment line):
1. Select lower level menu:
2. Frame the column, which contains the COPY MODE func-
tion,
or ; or
3. Set COPY MODE to REPORT:
4. Return to the A-scan display: or
5. Initiate printing: